How to Refill a Rick and Morty Tornado Vape (RandM Tornado)

The Rick and Morty Tornado Vape, commonly known as the RandM Tornado, is a disposable vape designed to offer thousands of puffs before disposal. While the device is marketed as non-refillable, some users attempt to refill it to extend its usage. If done correctly, refilling the RandM Tornado can save money and reduce waste.

This guide will walk you through the step-by-step process of refilling the RandM Tornado Vape, including safety precautions, necessary tools, and maintenance tips.

Understanding the RandM Tornado Vape

What is the RandM Tornado Vape?

The RandM Tornado is a pre-filled disposable vape that features:

• A built-in battery (usually rechargeable via USB-C).
• A sealed e-liquid tank that holds 12ml or more of vape juice.
• A mesh coil for better flavor and vapor production.
• Adjustable airflow to customize the vaping experience.

Unlike standard refillable vapes, this device is not designed for refilling, but it is possible with the right approach.

Precautions Before Refilling

Refilling a disposable vape can be risky. Keep these safety tips in mind:

1. Check the Coil Condition

• If your vape tastes burnt, the coil may be damaged. Refilling will not fix this issue.
• If the vapor output is low, the coil may be clogged. Cleaning it might help.

2. Avoid Overfilling

• Adding too much e-liquid can flood the coil, causing leaks and spitting.
• Always leave some air space in the tank to prevent pressure buildup.

3. Use Compatible E-Liquids

• The RandM Tornado uses a mesh coil, which works best with 50/50 PG/VG or 70/30 VG/PG e-liquids.
• Avoid thick VG liquids as they may not wick properly.

4. Refill at Your Own Risk

• The device is not meant to be refilled. Doing so may damage the vape, cause leaks, or void any warranties.

Step-by-Step Guide to Refilling the RandM Tornado Vape

Step 1: Gather the Necessary Tools

Before starting, prepare the following:
✔ E-liquid (compatible with mesh coils)
✔ Small flathead screwdriver or tweezers (for opening the device)
✔ Paper towels (to clean spills)
✔ Gloves (optional but recommended for handling e-liquid)

Step 2: Disassemble the Device

To access the e-liquid chamber, you need to remove the mouthpiece.

1. Hold the vape firmly and locate the top plastic cap (mouthpiece).
2. Use a flathead screwdriver or twist with your fingers to loosen the cap.
3. Gently wiggle and pull off the mouthpiece. It may take some effort, but avoid applying too much force to prevent damage.
4. Locate the silicone plug or rubber stopper covering the refill hole.

Step 3: Add the E-Liquid

Now that you’ve accessed the e-liquid chamber:

1. Remove the silicone stopper using tweezers or a small screwdriver.
2. Insert the e-liquid nozzle into the refill hole.
3. Slowly add e-liquid, stopping when the tank is 80-90% full (do not overfill).
4. Reinsert the silicone stopper to seal the tank properly.

💡 Pro Tip: Use a needle-tip bottle for precise filling to avoid spills.

Step 4: Reassemble the Device

1. Press the mouthpiece back into place firmly.
2. Ensure a tight seal to prevent leaks.
3. Wipe any excess e-liquid from the outside of the device.

Step 5: Let the Coil Soak (Priming)

Before using the vape, allow the coil to absorb the e-liquid:

1. Let the device sit upright for 10-15 minutes.
2. This prevents dry hits and ensures proper wicking.

💡 Skipping this step can burn the coil immediately!

Post-Refill Maintenance Tips

To keep your RandM Tornado working properly after refilling:

1. Monitor Your E-Liquid Levels

• Refill before the tank runs dry to prevent the coil from burning out.

2. Clean the Mouthpiece Regularly

• Use a cotton swab or alcohol wipe to remove residue and bacteria.

3. Store the Vape Properly

• Keep it in a cool, dry place, away from direct sunlight or heat.
• Avoid storing it upside down, as this may cause leaks.

Potential Issues & How to Fix Them

1. Vape Not Working After Refilling

❌ Possible Causes:

• Battery is dead or not charged.
• Coil is flooded due to overfilling.

✅ Solution:

• Charge the battery fully.
• Shake the device gently to remove excess e-liquid.

2. Gurgling or Leaking

❌ Possible Causes:

• Too much e-liquid in the tank.
• E-liquid entered the airflow chamber.

✅ Solution:

• Blow gently into the mouthpiece to clear excess liquid.
• Use a paper towel to soak up leaks.

3. Burnt or Bad Taste

❌ Possible Causes:

• The coil is too old or damaged.
• You didn’t let the coil soak before vaping.

✅ Solution:

• Replace the coil if possible (though unlikely in disposables).
• Let the vape sit for longer to allow proper saturation.

Is It Worth Refilling the RandM Tornado Vape?

While refilling your RandM Tornado can extend its use, there are pros and cons:

✅ Pros:
✔ Saves money by reusing the device.
✔ Reduces waste from disposable vapes.
✔ Allows you to use your favorite e-liquids.

❌ Cons:
✖ The device may leak or malfunction after refilling.
✖ Over time, the coil will still burn out, making refilling pointless.
✖ No guarantee that the vape will work properly after modification.

Verdict: If you’re comfortable with minor risks, refilling can be a temporary solution. However, investing in a refillable pod system may be a better long-term option.

Final Thoughts

Refilling a Rick and Morty Tornado Vape is possible with careful handling, but it is not an official feature of the device. Follow this guide at your own risk and take necessary precautions to avoid leaks or damage.

If you frequently vape, consider switching to a refillable vape device for better performance, cost savings, and sustainability.

Would you try refilling your RandM Tornado, or do you prefer using it as a disposable? Let us know your thoughts!